User Manual Q&AAnswer
Feb 10, 2024 - 01:16 AM
To pair your Bluetooth device with the JBL Clip 3 speaker, follow these steps:
1. Make sure Bluetooth is turned on on your phone or device.
2. Press and hold the Power button on the JBL Clip 3 speaker for 2 seconds to turn it on.
3. The speaker will enter pairing mode and the LED indicator will start flashing.
4. On your phone or device, go to Settings > Bluetooth and make sure it is turned on.
5. Wait for your phone or device to scan for available devices.
6. In the list of available devices, you should see "JBL Clip 3" or a similar name. Select it to connect.
7. Once connected, the LED indicator on the speaker will stop flashing and remain solid.
If the JBL Clip 3 speaker is not showing up in the list of available devices, try the following troubleshooting steps:
1. Make sure the speaker is within range of your phone or device (typically around 33 feet).
2. Turn off Bluetooth on your phone or device, then turn it back on and try again.
3. Restart your phone or device and try again.
4. If you have already paired your phone or device with another Bluetooth device, disconnect it before trying to pair with the JBL Clip 3.
5. If none of the above steps work, consult the JBL Clip 3 manual or contact JBL customer support for further assistance.
Add New Comment