Answer
Feb 06, 2024 - 02:15 AM
To clean the filter in your KitchenAid dishwasher, follow these steps:
1. Remove the bottom dish rack from the dishwasher.
2. Locate the filter, which is usually in one of the back corners of the dishwasher tub or around the base of the bottom spray arm.
3. Twist the filter counterclockwise to unlock it and lift it out of the dishwasher.
4. Rinse the filter under running water to remove any debris or food particles. You can use a soft brush or toothbrush to scrub away stubborn residue.
5. Inspect the filter for any damage. If the filter is damaged, it should be replaced.
6. Once the filter is clean, place it back into the dishwasher and twist it clockwise to lock it into place.
7. Make sure the filter is securely installed before putting the bottom dish rack back into the dishwasher.
Regularly cleaning the filter will help maintain the dishwasher's performance and prevent clogs that can affect the cleaning ability. For more detailed instructions and illustrations, refer to the "Filtration System" section in the full online User Instructions manual, which can be downloaded from the KitchenAid website at www.kitchenaid.com/customer-service/manuals.
Add New Comment