User Manual Q&AAnswer
Feb 05, 2024 - 10:40 PM
To connect the Bose Solo Soundbar Series II to your TV, you have two options:
Option 1 (Preferred): Optical Connection
1. Remove the caps from both ends of the optical cable.
2. Insert one end of the optical cable into the Audio OUT panel on your TV.
3. Insert the other end into the Optical port on the soundbar.
Option 2: Coaxial Connection
1. If your TV doesn't have an optical port, use a coaxial cable.
2. Insert one end of the coaxial cable into the Audio OUT panel on your TV.
3. Insert the other end into the Coaxial port on the soundbar.
Make sure to secure all cable connections and ensure they are correct. It is recommended to use only one audio cable. If you encounter any issues, refer to the troubleshooting steps in the Reference section of the user guide.
Please note that the Bose Solo Soundbar Series II is designed to play audio from any sources connected to your television, so you can leave your Blu-ray player connected to the TV and it will play through the soundbar.
For further instructions and troubleshooting information, you can refer to the online owner's guide at worldwide.Bose.com/Support/SBSoloii.
Add New Comment