User Manual Q&AAnswer
Jan 26, 2024 - 05:22 AM
To set up your Keurig Mini brewer, follow these steps:
1. Remove any packing tape from the brewer.
2. Pull the plug and extend the cord from the cord storage located at the back of the brewer.
3. Plug the brewer into a grounded outlet.
4. Press the power button. The power button will illuminate.
5. Add 1 cup (8oz) of water into a mug.
6. Lift the water reservoir lid and pour the water into the reservoir. Do not fill past the MAX or below the MIN fill lines.
7. Lower the lid and place your mug on the drip tray.
8. Lift and lower the handle without inserting a K-Cup pod. The brew indicator light will flash to indicate that the brewer is ready.
9. Press the brew button to perform a cleansing brew. The brew indicator light will illuminate solid, then begin to pulse while the brewer is heating. After about 2 minutes, the brew indicator light will illuminate solid again and the water will begin to dispense. Pour the hot water into the sink.
10. The one-time setup process is now complete and you are ready to brew!
For more detailed instructions and troubleshooting tips, refer to the KEURIG K.Mini Use and Care Guide provided with your brewer.
Add New Comment