User Manual Q&AAnswer
Jan 26, 2024 - 03:35 AM
To connect the Lefant Robot Vacuum Cleaner M201 to your Wi-Fi network, please follow these steps:
1. Make sure your mobile device is connected to the indoor 2.4G Wi-Fi network and the signal quality is good.
2. Download the Lefant Life app from the App Store (for iOS) or Google Play (for Android).
3. Open the app and register or log in to your account.
4. On the app's home screen, tap on the "+" icon to add a new device.
5. Follow the on-screen instructions to put the robot into network pairing mode. This can be done by turning on the side switch and pressing and holding the key for about 3 seconds until you hear a beep and release. The robot will enter the network configuration EZ mode, and the start/pause button will flash quickly in blue.
6. In the app, select the network pairing method (EZ mode or AP mode) based on the instructions provided in the manual.
7. If you choose EZ mode, make sure your mobile device is connected to the Wi-Fi network that starts with the name "SmartLife". Return to the app and start the network configuration.
8. If you choose AP mode, connect your phone to a Wi-Fi that starts with the name "SmartLife". After successfully connecting, return to the app and start the network configuration.
9. Follow the app's instructions to complete the network configuration process.
If you are still experiencing issues with connecting your Lefant Robot Vacuum Cleaner M201 to your Wi-Fi network, please refer to the troubleshooting section in the manual or contact the Lefant customer service center for further assistance.
Add New Comment