User Manual Q&AAnswer
Jan 26, 2024 - 02:49 AM
To properly apply the arm cuff for the Omron 3 Series BP7100 Blood Pressure Monitor, follow these steps:
1. Insert the air plug into the air jack securely.
2. Wrap the arm cuff firmly in place around your left upper arm. The bottom edge of the arm cuff should be 0.5 inch (1 to 2 cm) above the elbow. The air tube should be on the inside of your arm and aligned with your middle finger.
3. Secure the arm cuff closed with the fabric fastener.
Note: If you are taking a measurement on the right arm, the air tube will be at the side of your elbow. Be careful not to rest your arm on the air tube.
It is important to ensure that the arm cuff is applied correctly and securely for accurate blood pressure measurements.
Add New Comment