User Manual Q&AAnswers
Jan 26, 2024 - 02:42 AM
To login to the MERCUSYS Wireless Router admin interface, follow these steps:
1. Connect your computer to the MERCUSYS Wireless Router using an Ethernet cable or via Wi-Fi.
2. Open a web browser (e.g., Internet Explorer, Google Chrome, Mozilla Firefox).
3. In the address bar, enter either "http://192.168.1.1" or "http://mwlogin.net" and press Enter.
4. You will be directed to the login page of the router.
5. If this is your first time logging in, there is no default login password. You will be prompted to create a login password. Follow the on-screen instructions to set a password.
6. If you have forgotten the login password you previously created, unfortunately, there is no way to retrieve it. You will need to reset the router to its factory default settings.
7. To reset the MERCUSYS Wireless Router, locate the reset button on the rear panel of the device.
8. Using a pin or paperclip, press and hold the reset button for approximately 10 seconds while the device is running.
9. Release the reset button and wait for the router to reboot.
10. After the router has restarted, you can login to the admin interface using the default IP address "192.168.1.1" or "http://mwlogin.net".
11. Ensure that your computer's IP address is in the same subnet as the router. Your computer should have an IP address in the range of 192.168.1.2 to 192.168.1.253, with a subnet mask of 255.255.255.0.
12. Enter the IP address or URL in the address bar of your web browser and press Enter.
13. You will be prompted to enter the login credentials. Use the username and password you set during the initial setup or the default credentials if you have not changed them.
14. Once logged in, you can access and configure the settings of your MERCUSYS Wireless Router.
For further assistance or detailed tutorials, you can visit the MERCUSYS website at http://www.mercusys-wireless-router-s... or contact their technical support team at 1-800-903-1322.
Add New Comment