User Manual Q&AAnswer
Jan 26, 2024 - 02:12 AM
To install the exhaust hose and window kit for the SOLEUSAIR Portable Air Conditioner, please follow these steps:
1. Open the window or door to adjust the length of the Window Kit Panels to fit the opening. If necessary, mark the kit and cut one end down to properly fit the opening.
2. Twist the Exhaust Hose Connector over the discharge opening on the back of the unit and extend the Exhaust Hose. Keep the exhaust hose as short and straight as possible.
3. Attach the Window Kit Adapter to the Exhaust Hose. Then attach the Window Kit Adapter to the Window Kit panel.
4. Close the window or door tightly.
Please refer to the "WINDOW KIT ASSEMBLY" and "WINDOW KIT INSTALLATION" sections in the instruction manual for visual illustrations and additional information.
Note: The exhaust hose and window kit must be properly installed when operating the unit in air conditioning or dehumidifier mode. When using the unit as a fan, the window kit is not required.
Add New Comment