User Manual Q&AAnswer
Jan 21, 2024 - 06:22 AM
To descale your Keurig K Supreme Coffee Maker, follow these steps:
1. Prepare the Brewer: Pour the entire bottle of Keurig Descaling Solution into an empty water reservoir. Then, fill the empty bottle with water and pour it into the water reservoir. Place a large mug on the drip tray.
2. Descale the Brewer: To activate Descale Mode, begin with the brewer plugged in and powered off. Press and hold the 8oz and 12oz buttons together for 3 seconds. When flashing, press the brew button to start the descaling process. Once the brew is complete, pour the hot liquid into the sink. Repeat this step until the "ADD WATER" light illuminates.
3. Fresh Water Rinse: Empty and rinse the water reservoir and refill it to the MAX fill line with fresh water. When flashing, press the brew button to start the rinsing process. Once the brew is complete, pour the hot liquid into the sink. Repeat this step until the "DESCALE" notification turns off. The brewer has now exited Descale Mode and will be ready for use.
Note: The cleaning action of Keurig Descaling Solution may result in foam being dispensed from the brewer. This is normal, as the solution is reacting with the scale inside. If your brewer is heavily scaled, it may not fill properly after the descaler is added. In this case, turn off and unplug the brewer, discard the descaling solution, rinse the water reservoir thoroughly, and refill it with water. Plug the brewer back in, power it on, and repeat the Fresh Water Rinse cycle.
For more detailed instructions and visual guidance, you can refer to the "Descaling Your Brewer" section in the Keurig K Supreme Coffee Maker User Guide.
Add New Comment