User Manual Q&AAnswers
Jan 18, 2024 - 05:35 AM
To set up the WAVLINK AC1200 Dual Band Wi-Fi Extender/AP, you can follow the steps outlined in the user guide provided. Here is a step-by-step guide:
1. Plug the extender into a power outlet.
2. Connection:
2.1 Via Wireless: Turn on your Wi-Fi and search for the SSID of the extender on your wireless devices. Connect to it.
2.2 Via Cable: Connect an Ethernet cable from your PC/laptop to the LAN port of the extender.
3. Launch a browser from your laptop/PC or smartphone and enter "wifi.wavlink.com" or "192.168.10.1" in the address field. The default password is "admin".
4. Select a language and set a new login password following the rules provided.
5. Mode selection:
5.1 Select "Repeater mode" to extend your existing Wi-Fi network. Choose an upstream router manually or automatically.
5.2 Select "AP mode" to turn the extender into an access point. You can keep the old SSID or create new ones and set up a password.
If you prefer, you can also set up the extender using the WPS button on your router and the extender. Refer to "Option II" in the user guide for detailed instructions.
For more information and troubleshooting, you can refer to the user guide provided or visit the WAVLINK website at www.wavlink.com. If you have any further questions or need technical support, you can contact their support team at support@wavlink.com.
Sep 11, 2025 - 09:55 PM
To set up the WAVLINK AC1200 Dual Band Wi-Fi Extender/AP, follow these wavlink ac1200 setup instructions step by step:
Plug in the device – Connect the WAVLINK AC1200 to a power outlet near your router and wait until the power LED turns solid.
Connect to the extender – On your phone or computer, go to Wi-Fi settings and connect to the “WAVLINK-N” or “WAVLINK-AC” network.
Open the setup page – Launch a browser and type wifi.wavlink.com or 192.168.10.1 in the address bar.
Login – Enter the default credentials (usually admin/admin, unless changed).
Choose mode – Select “Repeater Mode” to extend Wi-Fi coverage, or “AP Mode” if you’re connecting through Ethernet.
Select your Wi-Fi network – Pick your existing router’s Wi-Fi SSID, enter the password, and confirm.
Reboot and place the extender – After saving, the extender will reboot. Move it to a location between your router and the weak signal area.
By following these wavlink ac1200 setup instructions, your extender will create a stronger and wider Wi-Fi network, ensuring seamless internet access for streaming, browsing, and gaming across multiple devices.
Plug in the device – Connect the WAVLINK AC1200 to a power outlet near your router and wait until the power LED turns solid.
Connect to the extender – On your phone or computer, go to Wi-Fi settings and connect to the “WAVLINK-N” or “WAVLINK-AC” network.
Open the setup page – Launch a browser and type wifi.wavlink.com or 192.168.10.1 in the address bar.
Login – Enter the default credentials (usually admin/admin, unless changed).
Choose mode – Select “Repeater Mode” to extend Wi-Fi coverage, or “AP Mode” if you’re connecting through Ethernet.
Select your Wi-Fi network – Pick your existing router’s Wi-Fi SSID, enter the password, and confirm.
Reboot and place the extender – After saving, the extender will reboot. Move it to a location between your router and the weak signal area.
By following these wavlink ac1200 setup instructions, your extender will create a stronger and wider Wi-Fi network, ensuring seamless internet access for streaming, browsing, and gaming across multiple devices.
Add New Comment