User Manual Q&AAnswer
Jan 18, 2024 - 04:49 AM
To set up your EufyCam 2C Wireless Camera Set, please follow these steps:
1. Connecting the HomeBase 2:
- Power on the HomeBase 2 and use the provided ethernet cable to connect it to your home router.
- Wait for the LED indicator on the HomeBase 2 to turn blue, indicating that it is ready for setup.
2. Getting the App and Setting up the System:
- Download the Eufy Security app from the App Store (for iOS devices) or Google Play (for Android devices).
- Sign up for a Eufy Security account and follow the onscreen instructions to complete the setup.
3. Mounting the Camera:
- Use the "Mounting Guide" function in the app to test the wireless signal strength of the EufyCam 2C at the desired mounting location. If the signal strength is poor, move the camera closer to the HomeBase 2.
- Hang the EufyCam 2C 7-10 ft (2-3 m) above the ground to maximize the motion sensor's detection range. Avoid direct sunlight.
- Disassemble the mounting bracket by turning the xxxx clockwise.
- Drill holes using a 1/4 inch (6.35mm) drill bit and insert anchors if needed for hard materials like concrete or brick.
- xxxx the base of the mounting bracket onto the wall and fasten the ball xxxx to the base.
- Attach the EufyCam 2C to the mounting bracket and adjust the viewing angle using the live stream feed in the Eufy Security app.
4. Charging the EufyCam 2C:
- There are two methods to charge the EufyCam 2C:
- Method 1: Connect the camera to a power source using the provided charging cable.
- Method 2: Remove the battery from the camera and charge it using a compatible battery charger.
- Follow the instructions in the manual for detailed charging procedures.
For more information and troubleshooting, you can refer to the Eufy EufyCam 2C Wireless Camera Set User Manual provided with the product.
Add New Comment