User Manual Q&AAnswer
Jan 18, 2024 - 03:42 AM
To adjust the height of the FRIGIDAIRE GALLERY Dishwasher, follow these steps:
1. Locate the leveling legs: The leveling legs are located at the bottom front corners of the dishwasher.
2. Use a wrench or pliers: Use a wrench or pliers to turn the leveling legs clockwise to raise the dishwasher or counterclockwise to lower it. Each full turn of the leveling legs will adjust the height by approximately 1/4 inch.
3. Check the level: Use a level to check if the dishwasher is level from front to back and side to side. Adjust the leveling legs as needed until the dishwasher is level.
4. Secure the dishwasher: Once the dishwasher is at the desired height and level, make sure to tighten the locking nuts on the leveling legs to secure the dishwasher in place.
Please refer to the FRIGIDAIRE GALLERY Dishwashers User Guide for more detailed instructions and illustrations on adjusting the height of the dishwasher.
Add New Comment