User Manual Q&AAnswer
Jan 16, 2024 - 01:21 AM
To adjust the cutting height on your John Deere tractor, please follow the steps outlined in the Operator's Manual:
1. Park the tractor on a level surface and engage the parking brake.
2. Locate the cutting height adjustment lever, which is usually located on the left side of the operator's seat.
3. Move the cutting height adjustment lever to the desired cutting height position. The cutting height options may vary depending on the specific model of your tractor.
4. Release the cutting height adjustment lever, ensuring that it locks into the selected position.
5. Start the engine and engage the mower blades.
6. Observe the cutting height of the mower deck. If further adjustment is required, repeat steps 2-4 until the desired cutting height is achieved.
7. Once the desired cutting height is set, you can proceed with mowing your lawn.
For more detailed instructions and illustrations, please refer to the "Cutting Height Adjustment" section in the Operator's Manual. It provides specific information for each model, including the recommended cutting heights and the corresponding lever positions.
Please note that it is important to regularly check and adjust the cutting height to ensure an even and precise cut for your lawn.
Add New Comment