User Manual Q&AAnswer
Jan 12, 2024 - 06:37 AM
To connect the Logitech MX Ergo Wireless Trackball Mouse to your computer, you have two options: Bluetooth or the Unifying receiver. Here are the steps for each method:
1. Connect with Bluetooth:
- Open Logitech Options software on your computer.
- Click "Add devices" in the software.
- Make sure your MX Ergo trackball is turned on by sliding the button on the bottom to the right.
- Turn the trackball over and press the Easy-Switch button to select a channel (1 or 2).
- Press and hold the Easy-Switch button for three seconds to enter pairing mode. The LED will start blinking quickly.
- Find the MX Ergo in your computer's list of Bluetooth devices and connect to it.
2. Connect using the Unifying receiver:
- Open Logitech Options software on your computer.
- Make sure your MX Ergo trackball is turned on by sliding the button on the bottom to the right.
- Turn the trackball over and press the Easy-Switch button to select a channel (1 or 2).
- Press and hold the Easy-Switch button for three seconds to enter pairing mode. The LED will start blinking quickly.
- Find the MX Ergo in your computer's list of Bluetooth devices and connect to it.
- Open Logitech Options software and click "Add devices".
Note: If you don't have the Logitech Options software installed, you can download it from the Logitech website.
For more detailed instructions and troubleshooting tips, refer to the Logitech MX Ergo Wireless Trackball Mouse User Manual.
Add New Comment