User Manual Q&AAnswer
Jan 11, 2024 - 04:55 AM
Connecting your VisionPRO Wi-Fi 8000 thermostat to your Wi-Fi network can be done during the initial setup or at a later time. Here is a step-by-step guide on how to connect your thermostat to Wi-Fi:
1. Connecting to Wi-Fi - Initial Setup:
- After completing the configuration step during the initial installation, you will be prompted to connect your thermostat to your home Wi-Fi.
- On the thermostat itself, go to Menu > Wi-Fi Setup. Select your home Wi-Fi network and enter the password on the thermostat screen.
- For TH8321WF model, after the initial configuration, you will be prompted to connect to Wi-Fi. Select your home Wi-Fi network and enter the password on your thermostat screen.
2. Connecting to Wi-Fi - 3-Step Process (TH8320WF / RTH8580WF models):
- Step 1: Connect your mobile device to the thermostat's Wi-Fi network (NewThermostatxxxxxx). On your mobile device, go to Settings > Wi-Fi and connect to the Wi-Fi network named "NewThermostatxxxxxx".
- Step 2: Connect the thermostat to your home Wi-Fi. Open a web browser on your mobile device and enter the IP address 192.168.1.1 to navigate to the "Thermostat Wi-Fi Setup" page. Select your home Wi-Fi network from the list and enter your Wi-Fi password. After a brief connection period, your thermostat will display a "Connection Success" message.
- Step 3: Register your thermostat on the My Total Connect Comfort web portal. Go to mytotalconnectcomfort.com/portal and create an account or log in. Select the "Add Device" icon and input the MAC ID / CRC for your thermostat. Complete the security check and follow the directions to complete the registration.
Note: Registration cannot be performed with the mobile app, only through the web portal.
If you encounter any issues during the Wi-Fi setup process, refer to the user guide specific to your thermostat model (TH8320WF, RTH8580WF, or TH8321WF) for troubleshooting steps and additional information.
Add New Comment