User Manual Q&AAnswer
Jan 04, 2024 - 06:27 AM
Sure! Here's a step-by-step guide on how to set up the tp-link AV600 Powerline Wi-Fi Extender:
1. Plug one of the powerline adapters into a power outlet near your router and connect it to the router using the provided Ethernet cable.
2. Plug the second powerline adapter into a power outlet in the room where you want to extend the Wi-Fi signal.
3. Press the Pair button on both powerline adapters to establish a secure connection between them. The Power LED on both adapters should turn on.
4. Wait for a few seconds until the Powerline LED on both adapters turns solid green, indicating a successful connection.
5. Press the Wi-Fi Clone button on the powerline adapter connected to the router. The Wi-Fi Clone LED will start blinking.
6. Within 2 minutes, press the Wi-Fi Clone button on the powerline adapter in the room where you want to extend the Wi-Fi signal. The Wi-Fi Clone LED will also start blinking.
7. Wait for the Wi-Fi Clone LED on both adapters to turn solid, indicating that the Wi-Fi network name and password have been copied successfully.
8. Connect your devices to the Wi-Fi network extended by the powerline adapter in the room. You can find the network name (SSID) and password on the label of the powerline adapter.
That's it! Your tp-link AV600 Powerline Wi-Fi Extender is now set up and ready to extend your Wi-Fi signal to every room using your existing electrical wiring. For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the device.
Add New Comment