User Manual Q&AAnswer
Jan 04, 2024 - 06:05 AM
To sync the remote to collar number 2, follow these steps:
1. Make sure the Receiver is turned off.
2. Press and hold the Switch on collar number 2 for 5 seconds until the green light flashes fast.
3. Press and hold the channel button on the remote (D), at the same time, rotate the level regulator (A) to select the dog icon for collar number 2. For example, if you want to pair collar number 2, the Dog 2 icon will flash.
4. Press the remote Pairing/Channel Select button (D) to pair collar number 2 with the remote.
5. If the pairing is successful, the receiver collar will beep and the green light will flash slowly.
Note: This process is for pairing additional receiver collars with one remote. If you only have one receiver collar, you can skip this step.
Please refer to the NVK Dog Training Collar Manual for more detailed instructions and illustrations.
Add New Comment