User Manual Q&AAnswer
Jan 04, 2024 - 05:48 AM
To set your Honeywell Ademco Vista security system to Away mode, follow these steps:
1. Make sure all perimeter doors and windows are closed.
2. Enter your security code on the keypad.
3. Press and hold the [STAY/AWAY] button for at least 4 seconds.
4. The keypad will display "Away-Stay" to indicate that the system is armed in Away mode.
5. Leave the premises through an entry/exit door during the exit delay period.
6. Make sure the door is reclosed to avoid triggering an alarm.
To return to Stay mode, press and hold the [STAY/AWAY] button for at least 4 seconds again. The keypad will display "Disarmed-Stay" to indicate that the system is disarmed.
For more detailed instructions and information, please refer to the Honeywell Ademco Vista User Manual VISTA-20P / VISTA-20PSIA & VISTA-15P / VISTA-15PSIA.
Add New Comment