User Manual Q&AAnswer
Jan 03, 2024 - 02:13 AM
To adjust the temperature on your Balboa hot tub control panel, follow these steps:
1. Locate the Temperature button on your control panel. It may be labeled as "Temp" or have an up and down arrow symbol.
2. Press the Temperature button once to make the temperature display start flashing.
3. Use the Temperature button to increase or decrease the temperature. Press the up arrow or plus sign to increase the temperature, and press the down arrow or minus sign to decrease the temperature.
4. Continue pressing the Temperature button until you reach your desired temperature. The temperature will stop flashing once it has been set.
5. Wait for the hot tub to heat up to the new set temperature. This may take some time depending on the current water temperature and the heating capabilities of your hot tub.
Note: If your control panel has separate WARM and COOL buttons, use the WARM button to increase the temperature and the COOL button to decrease the temperature.
For more detailed instructions and information on adjusting the temperature range and other temperature-related settings, refer to the BALBOA Control Panels User Guide for TP500 and TP500S Control Panels.
Add New Comment