User Manual Q&AAnswer
Jan 03, 2024 - 12:59 AM
Programming the remote control for your LiftMaster Premium Series Garage Door Opener is a simple process. Here are the step-by-step instructions:
1. Locate the Learn button on the garage door opener. It is usually located on the back or side panel of the opener.
2. Press and release the Learn button. The Learn indicator light will start flashing for 30 seconds.
3. Within 30 seconds, press and hold the button on the remote control that you want to program.
4. Release the button when the garage door opener light blinks or you hear two clicks. This indicates that the remote control has been programmed.
5. Test the remote control by pressing the programmed button to open or close the garage door.
Note: If you have multiple remote controls to program, repeat steps 3-5 for each remote control.
For more detailed instructions and troubleshooting tips, please refer to the LiftMaster Premium Series Garage Door Opener User's Guide.
Add New Comment