User Manual Q&AAnswer
Dec 30, 2023 - 05:45 AM
To connect the AKKO 3068 Bluetooth keyboard to your device, follow these steps:
1. Switch to Bluetooth mode: When the keyboard is unplugged, turn the switch on the back to the ON position. Then, long press and hold the Fn key along with either the E, R, or T key to start pairing with Bluetooth devices. The blue LEDs under the E, R, or T keys will flash quickly, indicating that the keyboard is in Bluetooth pairing mode.
2. Set the Bluetooth profile: The keyboard can be paired with a PC, Pad, smartphone, or other devices with Bluetooth turned on. When searching for Bluetooth devices, you may see two groups of device names: Akko 3098 BT3.0 (Bluetooth 3.0) and Akko 3098-1 (Bluetooth 5.0). Select the Bluetooth group based on your preferences (some devices may only search for the Bluetooth 5.0 group).
3. Switch between Bluetooth devices: After pairing up to four Bluetooth devices with the keyboard, you can quickly switch between them by pressing and holding the Fn key along with the E, R, T, or Y key for at least 3 seconds.
4. Power-saving mode: To save power, you can turn off the keyboard by switching the power off on the back panel. If the keyboard remains unused for over 10 minutes, it will enter sleep mode. You can activate it by pressing any key. Note that the sleep activation time may be affected by the battery saver mode of your Windows system.
5. Resetting the keyboard: If you need to clear the specific paired front-end device or if there are issues with Bluetooth connection and communication, you can reset the keyboard by removing the 3068 keyboard from the list of connected devices in your computer's Bluetooth settings.
Please refer to the AKKO 3068 Bluetooth Keyboard Manual for more detailed instructions and illustrations.
Add New Comment