User Manual Q&AAnswer
Dec 28, 2023 - 11:52 PM
To pair the camera and parent units of the HelloBaby Wireless Digital Video Baby Monitor, please follow these steps:
1. Make sure both the camera unit and parent unit are powered on.
2. Press the MENU key on the parent unit to access the menu.
3. Use the ◀ or ▶ keys to navigate to the camera icon and press the ▲ key or ▼ key to select the desired camera.
4. Press the OK key to enter the sub-menu.
5. Use the ▲ key or ▼ key to select "ADD CAM" and press the OK key.
6. While the "ADD CAM" message is displayed on the parent unit's screen, unplug the camera unit's power plug.
7. Press and hold the PAIR button on the camera unit and re-plug the power plug at the same time.
8. Continue holding the PAIR button until the camera's power indicator flashes.
9. Once paired, the camera icon on the parent unit's screen will display a checkmark or the word "PAIR" to indicate a successful pairing.
If the pairing process fails, you can repeat the above steps. Make sure to unplug and re-plug the camera unit's power plug while holding the PAIR button.
For further assistance, you can refer to the user manual provided with the HelloBaby baby monitor or contact the HelloBaby customer service at service@hellobaby.net.cn.
Add New Comment