User Manual Q&AAnswer
Dec 27, 2023 - 04:54 AM
Yes, you can mount the KALLAX on the wall using the pre-drilled holes and plastic xxxx sleeves provided. Here's how you can do it securely:
1. Prepare the KALLAX: While waiting for the paint to dry, prepare the KALLAX to be mounted on the wall. Use a counter-sink bit to pre-drill mounting holes. If there are any plastic parts covering the holes, trim them off with a knife.
2. Insert plastic xxxx sleeves: Tap plastic xxxx sleeves into all the pre-drilled holes. This will allow them to expand inside the material of the KALLAX walls, providing a secure anchor point for the screws.
3. Choose suitable screws and plugs: xxxx (s) and plug(s) for the wall are not included with the KALLAX. Make sure to use xxxx (s) and plug(s) suitable for your walls. If you are uncertain, it's best to seek professional advice or consult with a hardware store.
4. Attach the KALLAX to the wall: Position the KALLAX against the wall in the desired location. Insert the screws through the plastic xxxx sleeves and into the wall, making sure they are securely fastened. It's important to follow the instructions carefully to prevent tip-over accidents.
By following these steps and using the appropriate hardware, you can safely and securely mount your KALLAX on the wall, saving valuable floor space in your room. Remember to always read and follow each step of the instruction manual for proper assembly and safety precautions.
Add New Comment