User Manual Q&AAnswer
Dec 27, 2023 - 04:45 AM
To pair the remote and the receiver collar for the PATPET Dog Shock Collar, please follow these steps:
1. Make sure the remote and the receiver collar are both turned on.
2. With the remote turned on and the receiver collar turned off, press and hold the ON/OFF button on the receiver collar for 4-5 seconds.
3. The red and green LED lights on the receiver collar will blink for about 10 seconds, indicating that it is ready for pairing.
4. Press and hold the first Tone button and the second Vibration button on the remote at the same time for 2-3 seconds.
5. The LED light on the receiver collar will flash green for 5 times, indicating successful pairing.
Note: If you need to pair a second collar with the remote, simply press the Dog button on the remote to select the second dog, and then follow the above pairing steps from 2-4.
For more detailed instructions and illustrations, please refer to the "Pair the Remote and the Receiver Collar" section in the PATPET Dog Shock Collar user manual.
Add New Comment