User Manual Q&AAnswer
Dec 27, 2023 - 03:46 AM
To set up the JXLCAM A9 WiFi Camera, follow these steps:
1. Install the JXLCAM app: Download and install the JXLCAM app from the Apple App Store for iOS devices or from Google Play for Android devices. Make sure to grant all necessary permissions during installation.
2. Connect to WiFi: In local mode, open the list of WiFi networks on your phone and connect to the network named "B/xCCQ...". Once connected, open the JXLCAM app and click on "AP" to watch the video. In remote mode, ensure that there is an available WiFi signal near the camera. Turn on the camera and wait for the blue indicator light to flash quickly. Open the JXLCAM app and follow the steps to connect to the WiFi network.
3. Switch between local and remote modes: In local mode, you can watch the video within a range of 10 meters without WiFi. In remote mode, you can connect to an available WiFi signal near the camera for remote viewing.
4. Charge the device: Use a 500-1000mA charger to charge the camera. The red indicator light will be on during charging and turn off when fully charged. The camera can also be used while charging.
5. Turn on the device: Press the power button to start the camera. The blue indicator light will flash quickly, indicating that the camera is ready to be connected. If the blue indicator light is slow flashing, always on, or the camera cannot be connected, long press the reset button for 5 seconds to reset the camera.
For more detailed instructions and troubleshooting tips, please refer to the JXLCAM A9 WiFi Camera User Manual.
Add New Comment