How do I change the default codes on my Schlage Keypad Lock? (Schlage Keypad Lock User Manual BE365 FE575 FE595 User Guide)

Answer

manuals.plus

Dec 27, 2023 - 02:53 AM

To change the default codes on your Schlage Keypad Lock, follow these steps:

1. Locate the Programming Code: The default Programming Code is a six-digit number and can be found on the sticker on the back of the keypad assembly and the front of the user guide.

2. Enter Programming Mode: Press and release the Schlage button on the keypad. The button will turn orange, indicating that the lock is in programming mode.

3. Enter the Programming Code: Enter the six-digit Programming Code using the keypad.

4. Change the User Codes: After entering the Programming Code, you can now change the User Codes. Each User Code is a four-digit number. To change a User Code, follow these steps:
   a. Press the Schlage button.
   b. Enter the four-digit User Code you want to change.
   c. Press the Schlage button again.
   d. Enter the new four-digit User Code you want to set.
   e. Press the Schlage button one more time to confirm the new User Code.

5. Repeat Step 4 for each User Code you want to change.

6. Exit Programming Mode: To exit programming mode, press the Schlage button one more time. The button will turn green, indicating that the lock has exited programming mode.

By following these steps, you can easily change the default codes on your Schlage Keypad Lock and customize it to your desired User Codes for enhanced security. For more detailed instructions and information, refer to the Schlage Keypad Locks BE365/FE575/FE595 User Manual.