User Manual Q&AAnswer
Dec 27, 2023 - 02:52 AM
To program your Philips Universal Remote to control your TV, you can follow the Direct Code Entry method. Here are the step-by-step instructions:
1. Locate the Code List included with your remote. Find the section for the type of device you wish to control (e.g., TV).
2. Locate the brand of your TV and circle all the remote codes for that brand.
3. Press and hold down the SETUP button on the remote until the red light on the remote control turns on. Release the SETUP button. The red light will remain on.
4. Press and release the TV button on the remote. The red light will blink once and remain on.
5. Use the number buttons on the remote to enter the first 4-digit remote code you circled in the Code List. The red light will turn off after entering the fourth digit.
6. Point the remote at your TV and test the buttons on the remote to see if the TV responds as you would expect. If the buttons do not operate the TV, repeat steps 3-5 using the next code that you circled for your TV brand.
7. Repeat steps 3-6 for each TV brand you wish to control.
Note: Some codes may only operate a few functions of your TV. If you find that the remote does not control all the desired functions, you can try programming the remote with a different code from the Code List.
For more detailed instructions and troubleshooting tips, you can refer to the complete instruction guide provided with your Philips Universal Remote.
Add New Comment