User Manual Q&AAnswer
Dec 26, 2023 - 03:38 AM
To connect your ADT Pulse DBC835 HD DoorBell Camera to your WiFi network, please follow these steps:
1. Press the Doorbell/WPS button on the camera for more than 10 seconds until the LED blinks green.
2. Launch the ADT Pulse App or visit the ADT Pulse website and go to the Devices tab.
3. Tap the "+" button and select "Doorbell Camera" from the list of available devices.
4. Enter your WiFi password and tap "Connect".
5. Once connected, you should see a green check mark next to your device name.
Please note that your doorbell camera needs to be connected to AC power and already paired with an ADT Pulse account before you can use this feature. If you haven't paired your camera with an ADT Pulse account, please refer to Chapter 2 of the user manual for instructions on how to do so.
For more detailed information and troubleshooting tips, please refer to the user manual provided with your ADT Pulse DBC835 HD DoorBell Camera.
Add New Comment