How do I install the window sealing plate assembly for the INSIGNIA NS-AC10PWH9 Portable Air Conditioner? (Insignia NS-AC10PWH9 Portable Air Conditioner User Guide)

Answer

manuals.plus

Dec 25, 2023 - 04:04 AM

To install the window sealing plate assembly for the INSIGNIA NS-AC10PWH9 Portable Air Conditioner, follow these steps:

1. Measure the size of your window to determine the correct length for the window sealing plate assembly.

2. Attach the window sealing plates to the security bracket using the provided screws. Use two type A screws for each sealing plate.

3. Place the window sealing plate assembly in the window opening, adjusting the length to fit the window. The security bracket should be on the inside of the window.

4. Secure the window sealing plate assembly in place by using the provided screws. Use one type B xxxx to attach the hose adapter to the window sealing plate.

5. (Optional) If additional support is needed, use the type C xxxx to install the window security bracket.

6. Connect the exhaust hose to the exhaust outlet on the back of the air conditioner, and then connect the other end of the hose to the hose adapter on the window sealing plate assembly.

7. Ensure that the hose is properly connected and not twisted or obstructed.

8. (Optional) If you want to automatically drain water while using the dehumidifier, follow the instructions in the user guide under "Automatically drain water with a hose."

9. (Optional) Use the sealing gaskets provided to seal the window and prevent warm air from entering the room.

10. Plug in the air conditioner and turn it on to start cooling.

Note: It is important to read and follow the instructions in the user guide for proper installation and usage of the INSIGNIA NS-AC10PWH9 Portable Air Conditioner.