User Manual Q&AAnswer
Dec 25, 2023 - 02:46 AM
To pair the Xiaomi Redmi AirDots TWS Earbuds with your device, follow these steps:
1. Make sure the earbuds are charged. Place them back in the charging case and plug in the USB to allow them to charge for about an hour. The charging case should have a red light when charging.
2. Once charged, remove the earphones from the charging case. They will turn on automatically.
3. Turn on Bluetooth on your device.
4. Search for "Redmi AirDots_R" or "Redmi AirDots_L" depending on which earphone you want to pair. If it does not appear, refresh the Bluetooth device list and search again. The other earpiece should connect automatically.
5. To pair only one of the earphones, take out the earphone and the white light will flash quickly for about 4-5 seconds. Once the white light starts to flash slowly, check the Bluetooth device list on your smartphone and pair it. This works for either side of the earphones.
Note: If you are still unable to connect, make sure your mobile phone has Bluetooth enabled and restart your phone before trying again.
For more detailed instructions and troubleshooting, refer to the Xiaomi Redmi AirDots TWS Earbuds user manual.
Add New Comment