User Manual Q&AAnswer
Dec 19, 2023 - 01:53 AM
To adjust the cutting height on your Craftsman Push Mower, follow these steps:
1. Locate the cutting height adjustment lever, which is located above the front and rear right wheels of the mower.
2. Pull the height adjustment lever outward towards the wheel. This will release the lever and allow you to move it to the desired position for a change in cutting height.
3. Move the lever to the desired position. Make sure to adjust all wheels to the same position to ensure a uniform cut.
4. Release the lever towards the deck. This will lock the lever in place and set the cutting height.
It is important to note that for rough or uneven lawns, you may need to move each height adjustment lever to a higher position to prevent cutting the grass too close to the ground.
For more detailed instructions and illustrations, please refer to the "Adjustments" section of the Craftsman Push Mower Instruction Manual.
Add New Comment