User Manual Q&AAnswer
Dec 18, 2023 - 10:57 PM
Sure! Here are the step-by-step instructions for installing the Spectrum Advanced Voice Modem:
1. Connect the coaxial cable: Connect one end of the coaxial cable (not supplied) to the Cable connector on the rear panel of the modem, and connect the other end to the cable wall outlet. Make sure not to bend or over tighten the cables.
2. Connect the Ethernet cable: Take the Ethernet cable (supplied) and connect one end to the Ethernet (Internet) port on the back panel of the modem. Connect the other end to an Ethernet port on a wireless router or other Ethernet-enabled device.
3. Connect the phone cable: If you have voice service enabled by your service provider, you can connect an RJ-11 phone cable (not supplied) to the Voice 1 or 2 port on the modem. Connect the other end to the phone port of your telephone. Note that if voice service is not provisioned, telephone service will not be available.
4. Connect the power adapter: Take the power adapter (supplied) and connect one end to the Power port on the modem. Connect the other end to a power outlet.
Once you have completed these steps, your Spectrum Advanced Voice Modem should be installed and ready to use. For more detailed information and diagrams, please refer to the Spectrum Advanced Voice Modem User Guide.
Add New Comment