User Manual Q&AAnswer
Dec 12, 2023 - 12:29 AM
To install the iiwey T1 Dash Cam Front Rear and Inside, follow these steps:
1. Insert the SD card: Begin by inserting the provided SD card into the dash cam.
2. Install the suction mount: Attach the suction mount to the dash cam. You can adjust the lens angle by loosening the screws.
3. Connect the power cables: Connect the power cables to the dash cam. Hide the cables by routing them along the car's interior. You can remove the ceiling rubber or hide the wires under the footpad.
4. Plugin the cigarette lighter: Plug the power cable into the cigarette lighter socket and ensure the dash cam turns on.
5. Wire the rear camera: Adjust the lens angle of the rear camera and hide all the wires. Locate the reversing lamp in your car. Start your car and switch to the reversing gear to identify the lamp that lights up. Connect the red wire from the rear camera to the positive lead of the reversing lamp. Stick the rear camera in your car.
By following these steps, you should be able to properly install the iiwey T1 Dash Cam Front Rear and Inside in your vehicle. For more detailed instructions, refer to the product manual provided by iiwey.
Add New Comment