User Manual Q&AAnswer
Dec 10, 2023 - 12:18 AM
To pair your Baseus WM01 Plus Encok True Wireless Earphones with your mobile device, please follow these steps:
1. Make sure the earphones are charged. If they are not charged, place them in the charging case and wait for them to fully charge.
2. Take out the earphones from the charging case and long press the touch area on both earphones for 3 seconds to turn them on. The earphones will automatically enter pairing mode.
3. On your mobile device, go to the Bluetooth settings and turn on Bluetooth.
4. In the Bluetooth settings, search for available devices. You should see "Baseus Encok WM01" or a similar name in the list of available devices.
5. Tap on "Baseus Encok WM01" to connect to the earphones. Once connected, you will hear a voice prompt or see a notification on your mobile device confirming the successful pairing.
Note: If the pairing fails, make sure the distance between the earphones and your mobile device is within 1 meter. You may also need to repeat the pairing process or perform a factory reset as described in the user manual.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with your Baseus WM01 Plus Encok True Wireless Earphones.
Add New Comment