User Manual Q&AAnswer
Dec 09, 2023 - 11:50 PM
To connect the V8 Sound Card to your computer, please follow these steps:
1. Make sure your computer is turned on and the V8 Sound Card is powered off.
2. Locate the USB charging cable that came with the V8 Sound Card.
3. Connect one end of the USB cable to the charging port on the V8 Sound Card.
4. Connect the other end of the USB cable to an available USB port on your computer.
5. Once the USB cable is connected, turn on the V8 Sound Card by pressing and holding the "POWER" button for 3 seconds.
6. Your computer should automatically recognize the V8 Sound Card and install the necessary drivers. You may see a notification in the lower right corner of your computer screen indicating that the sound card driver has been installed.
7. To confirm that the sound card is recognized by your computer, right-click the loudspeaker icon on the taskbar and select "Playback devices" or "Recording devices" (depending on your operating system).
8. In the sound settings window, you should see the V8 Sound Card listed as an available device. Set it as the default device for playback or recording, depending on your needs.
9. Once the V8 Sound Card is properly connected and recognized by your computer, you can start using it for live broadcasting or recording.
Please refer to the BlueBird Microphone and V8 Card Sound User Manual for more detailed instructions and troubleshooting tips.
Add New Comment