User Manual Q&AAnswer
Dec 09, 2023 - 11:32 PM
To change the capture mode on your Tasco Trail Camera, follow these steps:
1. Move the Power Switch to the middle (AIM) position to enter Setup Mode.
2. The LCD Display will show the camera's current settings in Setup Mode.
3. Use the UP and DOWN keys to navigate through the options.
4. Select the "Capture Mode" option using the UP or DOWN key.
5. Press the OK key to enter the Capture Mode settings.
6. Use the UP and DOWN keys to select your preferred capture mode: Single Photo per trigger, Rapid Sequence of 3 Photos per trigger, or Video Clips that are 10 seconds long at 720p resolution.
7. Press the OK key to confirm your selection.
8. Exit Setup Mode by moving the Power Switch to the ON position for normal operation.
By following these steps, you can easily change the capture mode on your Tasco Trail Camera to suit your specific needs and preferences. For more detailed instructions, please refer to the Tasco Trail Camera Instruction Manual for the 119270CW/119271CW models.
Add New Comment