User Manual Q&AAnswer
Dec 09, 2023 - 11:28 PM
To insert a SIM card or microSD card into the TCL-4056L FLIP Phone, follow these steps:
1. Power off the device before opening the back cover.
2. With the device facing down, remove the back cover from the bottom left corner by carefully lifting it away from the device body.
3. Remove the battery by lifting it from the top left corner.
4. To insert the SIM card or microSD card, push it into the card slot with the gold-colored contacts facing down.
5. To remove the SIM card or microSD card, press down on the small plastic tab and slide out the card.
6. Re-install the battery by aligning the gold contact points of the battery with the gold contact points of the device and pressing down to snap it in place.
7. Carefully align the back cover with the tabs and press it into place.
8. Charge your phone fully before turning it on and starting the setup process.
Please note that the TCL-4056L FLIP Phone already has a NANO SIM card installed, and microSD cards (up to 32GB) may be purchased separately.
For more detailed instructions and illustrations, refer to the TCL-4056L FLIP Phone User Guide.
Add New Comment