User Manual Q&AAnswer
Dec 07, 2023 - 11:39 PM
To set up the Starlink Router, follow these steps:
1. Plug everything in: Connect the white Ethernet cable between the white Power Supply port and the bottom port of the Router. Ensure that all cables are connected correctly.
2. Power up the Router: Once everything is connected, the Router LED will glow a pulsing white. This indicates that the Router is initializing.
3. Connect to the Router: Wait for the Router LED to become solid white. This indicates that the software is initialized and the Router is ready for login. Connect to the Router using the provided Network ID and password.
4. Establish an internet connection: After successfully logging in, wait for the Router LED to glow blue. This indicates that the Router is connected to the internet, and you will be able to browse the web.
Note: If you don't have a WiFi device, you can also connect your computer directly to the Router using an Ethernet cable.
For more detailed instructions and troubleshooting tips, refer to the Starlink Router User Manual.
Add New Comment