User Manual Q&AAnswer
Dec 07, 2023 - 10:31 PM
To set up the INTEX Krystal Clear 601 Filter Pump for your storable pool, please follow these steps:
1. Assemble your above-ground pool according to the pool's installation instructions.
2. Place the filter pump at a distance from the pool wall, where the lower black protruding hose connection is "sticking out."
3. Insert the nozzle union into the upper protruding hose connections and attach the pool inlet air adaptor to the upper protruding fitting. xxxx the air jet valve over the pool inlet air adaptor. Then insert the strainer union into the lower protruding hose connections.
4. Connect the hoses to the filter pump hose connections. Use hose clamps to secure the hoses to the appropriate connections.
5. Unscrew the threaded filter housing collar from the filter housing in a counter-clockwise motion. Remove the housing cover and check if a cartridge is inside. If there is a cartridge, replace the cover and finger tighten the housing collar back onto the filter housing.
6. Fill the pool to a level of at least 1-2 inches above the top connection. The water will automatically flow down into the pump.
7. When water starts flowing out of the air release valve hole, xxxx in the air release valve back into the filter housing cover. Do not over tighten the valve.
8. Connect the filter pump to the power outlet. The filter pump is now filtering the water.
Please refer to the INTEX Krystal Clear 601 Filter Pump Owner's Manual for more detailed instructions and safety guidelines. It is important to read and understand all instructions carefully before installing and using the product to reduce the risk of injury or property damage.
Add New Comment