User Manual Q&AAnswer
Dec 07, 2023 - 03:50 AM
To load paper into the HP DeskJet 2700 All-in-One printer, follow these steps:
1. Raise the input tray.
2. Slide the paper-width guide to the left.
3. Insert a stack of paper into the input tray with the short edge down and the print side up. Slide the stack of paper down until it stops.
4. Slide the paper-width guide to the right until it stops at the edge of the paper.
5. Lower the output tray and pull out the output tray extender.
Note: If you are loading envelopes, follow the same steps but insert the envelopes into the far-right side of the input tray with the side to be printed on facing up.
For more detailed information and illustrations, please refer to the "Load media" section in the HP DeskJet 2700 All-in-One series User Manual.
Add New Comment