User Manual Q&AAnswers
Dec 07, 2023 - 03:26 AM
To pair the i12 Airpods with your device, follow these steps:
1. Turn on the charging case by pressing the button on the case. A blue or red light will turn on.
2. Open the case lid and take the earbuds out. It's important to turn on the charging case before opening the lid so the earbuds can turn on and connect to your device.
3. Activate Bluetooth on your device. Go to the Bluetooth settings and turn it on.
4. Look for the name "i12" in the list of available devices and click on it to start the connection.
5. Once connected, you should see a notification or hear a sound indicating that the pairing is successful.
If the pairing is not successful, make sure you have followed all the steps correctly. Turn off the charging case, take the earbuds out, and try again. If the issue persists, refer to the user manual or contact customer service for further assistance.
Please note that the specific steps may vary slightly depending on your device and operating system.
Feb 05, 2025 - 06:49 AM
Here's a better guide to connecting i12 tws airpods:
Step 1: Open the charging case lid and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.
When a red and blue/red light starts flashing in one of the earbuds, they will be ready to pair with any device.
Step 2: Unlock the desired device.
Step 3: Go to the device’s settings.
Step 4: Turn on Bluetooth on the desired device.
Step 5: Search for a new device.
Step 6: Select the i12 or TWS earbuds. If a password is needed, type “0000”.
After that, the flashing light on the earbud will turn off, and the pairing will be done.
Add New Comment