User Manual Q&AAnswer
Nov 26, 2023 - 06:39 AM
SETTING THE WATCH
These instructions apply to a variety of watch styles. To change the time, day, or date on your analog watch simply follow the accompanying instructions according to your specific style.
A. NEUTRAL POSITION: This is the normal operating position of the watch in which the crown is free to turn in either direction without any affect on the time.
B. POSITION TO SET THE DATE: (for watches with date windows)
C. POSITION TO SET THE TIME
SETTING THE TIME ON STANDARD ANALOG WATCH STYLES
The standard style has no calendar or day/date windows on the dial and, unlike the diagram, has only 2 crown positions: A (closed) and C (open).To change the time, pull the crown out all the way until it stops (position C). Rotate the crown in either direction until desire time is obtained. Next, push the crown all the way back to position A to re-engage timekeeping. (If watch has a second hand, it will begin to move.) SETTING THE TIME ON CALENDAR & DAY/DATE WATCH STYLES For time setting: Follow the above instructions.
SETTING THE TIME ON CALENDAR WATCHES
If your watch has a date window only, pull the crown out to position B (see diagram) and turn the crown in either a clockwise or counter clockwise direction (depending on watch style). Continue to rotate crown until desired date is obtained. Push the crown all the way back to position A to re-engage timekeeping.
image source: Manuals.plus
SETTING THE DAY/DATE
If your watch has a date window only, pull the crown out to position B (see diagram). Rotate in either a clockwise or counter-clockwise direction (depending on watch style) to change the day or the date. Each turn of the crown will advance the day or date respectively. If the day does not advance using this method, pull the crown to position C and rotate until the time advances each 24 hour period. Continue to rotate the crown until desired day is obtained. After the correct time has been set, push the crown all the way back to position A to re-engage timekeeping.
NOTE: During normal timekeeping (watch running with crown in position A) the day and/ or date will advance between the hours of 11pm and 5am. Please keep this in mind when setting the watch.
WATER RESISTANCE
This is a WATER RESISTANT watch. Do not operate push buttons below the surface of the water. Should water or condensation appear in the watch, immediately have the watch checked. Water can corrode electronic parts inside the case.
Add New Comment