User Manual Q&A
Answer
Nov 25, 2023 - 05:34 PM
Answer: To pair your TOZO T6 True Wireless Earbuds with your smartphone, you should follow these steps:
1. Charge the Earbuds: Before pairing, ensure that your earbuds and the charging case are sufficiently charged.
2. Initiate Pairing Mode: Remove both earbuds from the charging case. This should automatically power them on and put them into pairing mode. You will typically hear an audible cue or see a blinking light indicating that the earbuds are in pairing mode.
3. Enable Bluetooth on Your Phone: Go to the Bluetooth settings on your smartphone. This is usually found in the settings menu under "Connections" or "Bluetooth."
4. Search for Devices: In the Bluetooth settings, select the option to search for or add a new device.
5. Select the TOZO T6: Once your phone detects the earbuds, they should appear in the list of available devices as "TOZO-T6." Tap on this name to connect.
6. Confirmation: Once connected, you will usually hear a confirmation message through the earbuds, and the LED lights may change to indicate a successful connection.
7. Troubleshooting: If your phone does not detect the earbuds, put them back into the charging case, wait a few seconds, and then try removing them again. Make sure that the earbuds are not already connected to another device, as this can prevent new connections.
8. Manual Pairing: If automatic pairing does not work, you can manually put the earbuds into pairing mode by touching and holding the touch control area on both earbuds for a few seconds until you hear the pairing prompt.
Remember that you only need to pair your earbuds once. After the initial setup, the TOZO T6 earbuds should automatically connect to your phone whenever you take them out of the charging case, provided Bluetooth is enabled on your phone. If you encounter any issues or the earbuds do not work as expected, refer to the user manual for troubleshooting tips or contact TOZO customer support for assistance.
1. Charge the Earbuds: Before pairing, ensure that your earbuds and the charging case are sufficiently charged.
2. Initiate Pairing Mode: Remove both earbuds from the charging case. This should automatically power them on and put them into pairing mode. You will typically hear an audible cue or see a blinking light indicating that the earbuds are in pairing mode.
3. Enable Bluetooth on Your Phone: Go to the Bluetooth settings on your smartphone. This is usually found in the settings menu under "Connections" or "Bluetooth."
4. Search for Devices: In the Bluetooth settings, select the option to search for or add a new device.
5. Select the TOZO T6: Once your phone detects the earbuds, they should appear in the list of available devices as "TOZO-T6." Tap on this name to connect.
6. Confirmation: Once connected, you will usually hear a confirmation message through the earbuds, and the LED lights may change to indicate a successful connection.
7. Troubleshooting: If your phone does not detect the earbuds, put them back into the charging case, wait a few seconds, and then try removing them again. Make sure that the earbuds are not already connected to another device, as this can prevent new connections.
8. Manual Pairing: If automatic pairing does not work, you can manually put the earbuds into pairing mode by touching and holding the touch control area on both earbuds for a few seconds until you hear the pairing prompt.
Remember that you only need to pair your earbuds once. After the initial setup, the TOZO T6 earbuds should automatically connect to your phone whenever you take them out of the charging case, provided Bluetooth is enabled on your phone. If you encounter any issues or the earbuds do not work as expected, refer to the user manual for troubleshooting tips or contact TOZO customer support for assistance.
Add New Comment