User Manual Q&A
Answer
Nov 25, 2023 - 05:33 PM
To pair your BMANI-VEAT00L earbuds with your Bluetooth device for the first time, please follow these steps:
1. Charge the Earbuds: Ensure that your earbuds are charged. You can check the battery level on the case's LED display.
2. Enable Bluetooth on Your Device: Go to the Bluetooth settings on your device and make sure Bluetooth is turned on.
3. Take Earbuds Out of the Case: Remove the earbuds from the charging case. This should put them into pairing mode automatically, indicated by a flashing LED light on the earbuds. If they do not enter pairing mode, you may need to hold down the button on each earbud for a few seconds.
4. Select the Earbuds on Your Device: Look for the earbuds' model number, T16, on the list of available Bluetooth devices on your device's screen.
5. Confirm the Pairing: Tap on the model number to pair. A message may appear to confirm the pairing, or you might hear an audible confirmation through the earbuds.
6. Check the Connection: Once paired, the LED on the earbuds should stop flashing, indicating a successful connection.
7. Troubleshooting: If the earbuds do not appear on your device's Bluetooth list, or if they do not pair, try putting them back into the charging case and taking them out again. If this does not work, you may need to reset the earbuds according to the manufacturer's instructions.
Remember, after the first time, the earbuds should automatically connect to the last paired device when taken out of the charging case, provided Bluetooth is enabled on that device. If you face any issues or the earbuds do not work as described, consult the user manual or contact BMANI customer support for further assistance.
1. Charge the Earbuds: Ensure that your earbuds are charged. You can check the battery level on the case's LED display.
2. Enable Bluetooth on Your Device: Go to the Bluetooth settings on your device and make sure Bluetooth is turned on.
3. Take Earbuds Out of the Case: Remove the earbuds from the charging case. This should put them into pairing mode automatically, indicated by a flashing LED light on the earbuds. If they do not enter pairing mode, you may need to hold down the button on each earbud for a few seconds.
4. Select the Earbuds on Your Device: Look for the earbuds' model number, T16, on the list of available Bluetooth devices on your device's screen.
5. Confirm the Pairing: Tap on the model number to pair. A message may appear to confirm the pairing, or you might hear an audible confirmation through the earbuds.
6. Check the Connection: Once paired, the LED on the earbuds should stop flashing, indicating a successful connection.
7. Troubleshooting: If the earbuds do not appear on your device's Bluetooth list, or if they do not pair, try putting them back into the charging case and taking them out again. If this does not work, you may need to reset the earbuds according to the manufacturer's instructions.
Remember, after the first time, the earbuds should automatically connect to the last paired device when taken out of the charging case, provided Bluetooth is enabled on that device. If you face any issues or the earbuds do not work as described, consult the user manual or contact BMANI customer support for further assistance.
Add New Comment