User Manual Q&AAnswers
Nov 25, 2023 - 01:54 PM
To program the GE Universal Remote Control to operate your TV, follow these step-by-step instructions:
1. Make sure you have fresh batteries installed in the remote.
2. Locate the Code List included with your remote. Find the section for TVs and locate the brand of your TV. Circle all the remote codes for your TV brand.
3. Press and hold down the SETUP button on the remote until the red light on the remote control turns on. Release the SETUP button. The red light will remain on.
4. Press and release the TV button on the remote. The red light will blink once and remain on.
5. Use the number buttons on the remote to enter the first 4-digit remote code you circled in the Code List. The red light will turn off after entering the fourth digit.
6. Point the remote at your TV and test the buttons on the remote to see if the TV responds as expected. If the buttons do not operate the TV, go back to Step 3 and use the next code that you circled for your TV brand.
7. Repeat Steps 3-6 for each code you circled for your TV brand until you find a code that works with your TV.
Note: Some codes may only operate a few functions of your TV. If you find a code that partially works, try other codes in the Code List for more functionality.
If you are unable to find a remote code that works for your TV or there are no codes listed for your TV brand, you can try using the Auto Code Search method. Refer to the manual for detailed instructions on how to use the Auto Code Search method.
If you have any further questions or need additional assistance, you can visit the manufacturer's website or contact their Technical Support Group at 1-800-654-8483.
Sep 19, 2024 - 04:09 AM
To program your GE Universal Remote Control to operate your TV, follow these steps:
-
Insert Fresh Batteries: Ensure your remote has fresh batteries installed.
-
Find the Code List: Locate the Code List that came with your remote. Look for the section for TVs and identify the codes for your TV brand.
-
Prepare the Remote:
- Press and hold the SETUP button until the red light turns on, then release the SETUP button. The red light will remain on.
-
Enter the TV Mode:
- Press and release the TV button. The red light will blink and then stay on.
-
Input the Code:
- Enter the first 4-digit code from the Code List for your TV brand. The red light will turn off after entering the fourth digit.
-
Test the Remote:
- Point the remote at your TV and test its buttons. If the TV does not respond, repeat steps 3 to 5 with the next code from the list.
-
Try Additional Codes:
- Continue this process with each code listed for your TV brand until you find one that works.
Source: https://geuniversalremote.codes/
Feb 19, 2025 - 08:21 PM
Need instructions on how to connect with a Sony TV
Add New Comment