User Manual Q&AAnswer
Nov 25, 2023 - 01:11 PM
To pair your Skullcandy Dime TWS Earbuds with your device, follow these steps:
1. Remove the earphones from the case and clean the charging contact points of stickers. Before using the earphones for the first time, it is recommended to charge them for about 30 minutes in the case. Make sure the earphones' LEDs glow red to signal that they are charging.
2. Once charged, remove the earbuds from the case. Both earbuds will turn on automatically, and the LEDs will glow blue at the same time as they sync.
3. You'll hear a voice prompt that reads 'Pairing' once the earbuds have synchronized. The left earbud will begin flashing red/blue. Turn on Bluetooth on your device and search for 'Dime®' in the list of available Bluetooth devices. If your buds don't automatically enter pairing mode, hold the button for 4 seconds.
4. Select 'Dime®' from the list of available Bluetooth devices on your device to complete the pairing process.
Note: If you have already paired your earbuds with one device and want to pair them with another device, you can follow the "Pairing the New Device" section in the manual.
For more detailed instructions and troubleshooting tips, please refer to the Skullcandy Dime TWS Earbuds Instruction Manual provided.
1. Remove the earphones from the case and clean the charging contact points of stickers. Before using the earphones for the first time, it is recommended to charge them for about 30 minutes in the case. Make sure the earphones' LEDs glow red to signal that they are charging.
2. Once charged, remove the earbuds from the case. Both earbuds will turn on automatically, and the LEDs will glow blue at the same time as they sync.
3. You'll hear a voice prompt that reads 'Pairing' once the earbuds have synchronized. The left earbud will begin flashing red/blue. Turn on Bluetooth on your device and search for 'Dime®' in the list of available Bluetooth devices. If your buds don't automatically enter pairing mode, hold the button for 4 seconds.
4. Select 'Dime®' from the list of available Bluetooth devices on your device to complete the pairing process.
Note: If you have already paired your earbuds with one device and want to pair them with another device, you can follow the "Pairing the New Device" section in the manual.
For more detailed instructions and troubleshooting tips, please refer to the Skullcandy Dime TWS Earbuds Instruction Manual provided.
Add New Comment